manualshive.com logo in svg

NEC Express5800/T120a-E N8100-1531F, User Manual, Page: 444 / 542

Share
Download
NEC Express5800/T120a-E N8100-1531F User Manual Download Page 444

D-8    Installing Windows Server 2008

Windows Server 2008 Clean Installation

This section explains how to perform a clean installation of Windows Server 2008.

IMPORTANT:

 The installation procedure depends on your

environment.
Follow steps below appropriate to your environment.

<In case using Onboard RAID controller (LSI Embedded MegaRAID

)>

 

1. 

Turn on your system.

IMPORTANT:

 To install Windows Server 2008, you may need to

update BIOS. To check if your system needs a BIOS update, go to:
http://www.nec.com/express/.

 

2. 

Insert the Windows Server 2008 DVD-ROM into your DVD-ROM drive.

NOTE:

 When You use "Onboard RAID controller (LSI Embedded

MegaRAID

)", "Windows Server 2008 OEM-Disk for

EXPRESSBUILDER" is necessary.

 

3. 

Restart the system.
To restart the system, press 

Ctrl

 + 

Alt

 + 

Del

 or turn off the system once, and then turn it

on again.

IMPORTANT:

 When prompted to [press any key to boot from CD or

DVD], press 

Enter

 while the message is displayed. If the Windows

installation screen (shown in step 4) does not appear, turn off the system,
and then turn it on again.

The DVD-ROM starts. A message "Windows is loading files …" appears.

 

4. 

Select a language and other options from the drop-down lists, and then click [Next].

Summary of Contents for Express5800/T120a-E N8100-1531F































































































































































































































































































































































































































































































































































Reviews:

No comments