![background image](http://html1.mh-extra.com/html/nautilus-hyosung/monimax-5100t/monimax-5100t_operators-manual_3513256044.webp)
MoniMax 5100T 5. Operator Function
5-2
5. Operator Function
5.1 PASSWORD FOR ENTERING SUPERVISOR MODE
All MoniMax machines use Operator Function. But the way to enter Supervisor mode is different
depending on the Supervisor device type.)
If using front screen, you should press the ENTER, CLEAR, CANCEL 1,2 and 3 keys in order.
In case of using T-SPL, to enter Supervisor mode, input
66
option on T-SPL after changing convert
switch located on the rear of ATM from IN SERVICE to SUPERVISOR status, as shown in below
picture,
Lastly, if using H-SPL, to enter Supervisor mode, just input
66
option on H-SPL.
If ATM support T-SPL or H-SPL rear screen, you can use rear or front screen either to enter
Supervisor mode. (Input
66
option on T-SPL/H-SPL or “
ENTER, CLEAR, CANCEL, 1, 2 and 3
on
pinpad”) You just use front screen, if you enter the Supervisor mode via front screen.
Please press entry key(“
ENTER
,
CLEAR
,
CANCEL
,
1
,
2
and
3
” or “
66
”) on pinpad or SPL device
so that you can see password screen to input password.
The default password is “555555”(6 digits). The default password is changeaible in Supervisor
mode. After inputting correct exact password of 4~6 digit, press
CONFRIM
key in order to enter
Supervisor main menu. Pressing
CLEAR
key erases the input number and pressing
CANCEL
key
goes to Application mode.
Depending on authority, there are three kinds of default password like below table.
Authority Default
Password
OPERATOR
111111 (6 digits)
SERVICE 222222
(6
digits)
MASTER 555555
(6
digits)
Summary of Contents for MoniMax 5100T
