Nautilus Hyosung MoniMax 5100T Operator'S Manual Download Page 189

Page: 189 / 279

MoniMax 5100T

Option C. Operator Function of H-SPL

C-10

C.1.4.2 PRINT ALL SETUP

This menu prints out all information regarding each device as well as system value setup.

C.1.5 RCOPY

You can back up journal data and log data you want in this menu. RCOPY JOURNAL or RCOPY

LOG is selected, this data will copy in floppy disk or USB memory stick. IF SOFTWARE

INSTALLATION is entered, it will be changed to the screen of SOFTWARE INSTALLATION.

CONTENTS

Press

, copy JOURNAL to USB.

Press

, move to RCOPY LOG screen.

Press

, move to SW INSTALL screen.

Press

CANCEL

, move to REPORT screen.

Press

, move to next line.

Press

, move to previous line.

C.1.5.1 RCOPY JOURNAL

Copy EJ.mdb saved in D:\EJR\MDB to USB.

C.1.5.2 RCOPY LOG

This menu provides a function to copy log for the inputted date to floppy or USB. Display local

current date as default when entering “11) RCOPY LOG”. You select “1) INPUT DATE” and input

wanted date if you want to change saved date.

Summary of Contents for MoniMax 5100T























































































































































































































































































Search results

Summary of Contents for MoniMax 5100T

Reviews:

Related manuals for MoniMax 5100T

Brands by name

Popular brands

Nautilus Hyosung MoniMax 5100T, Operator'S Manual

Search results

Summary of Contents for MoniMax 5100T

Reviews:

Related manuals for MoniMax 5100T

Brands by name

Popular brands