MoniMax 5100T 7. Appendix
7-
31
Error Code
Cause
Handling
D140100
Disconnected by unknown reason
D140200
Disconnected by Remote Party rejected
call
D140300
Disconnected by Local phone picked up
D140400 Disconnected
by
Forwarded
D140500 Disconnected
by
Unreachable
D140600 Disconnected
by
Congestion
D140700 Disconnected
by
Incompatible
D140800
Disconnected by Bad Reason
D160100
Disconnected by Bad Address
1. Check the host.
D160200
Disconnected by Unavailable
1. Check the host.
D170X00
No carrier
No carrir during data transmission after
the modem is connected.
2. Check
the
host.
3. Check if the transaction card is valid.
4. Check
line
noise.
5. Check the modem controller and logic.
D170100
No carrier before sending data after
modem connection
1. Check phone line status
2. Check ground of AC power and noise between
modem cable and
power cable
D170200
No carrier before receiving ENQ from
host
1. Check phone line status
2. Check ground of AC power and noise between
modem cable and
power cable
D170300
No carrier before sending transaction
Inquire data to host
1. Check phone line status
2. Check ground of AC power and noise between
modem cable and
power cable
D170400
No carrier after sending transaction
Inquire data to host
1. Check phone line status
2. Check ground of AC power and noise between
modem cable and
power cable
D170500
No carrier before receiving ACK from
host
1. Check phone line status
2. Check ground of AC power and noise between
modem cable and
power cable
Summary of Contents for MoniMax 5100T
