Nautilus Hyosung MoniMax 5100T, Operator'S Manual

Page: 80 / 279

MoniMax 5100T 5. Operator Function
5-38
5.4.4.6 MODEM TEST
This function is used to set the telephone number and used to perform the modem reset test.
Number and “,” character can be input up to 1~20 digits by using '<' or '>'. This value is saved
by pressing CONFIRM button, on the other hand, to go back to the previous screen, just press
the CANCEL key in pinpad.
[Touch Machine] [No Touch Machine]
5.4.4.7 ATM IP SETUP
This is setting up whether to use DHCP(Dynamic Host Configuration Protocol) or not and ATM
IP SETUP information to connect to host.
[Touch Machine] [No Touch Machine]
If DHCP values is “ENABLE”, ATM uses dynamic IP to connect to host. Otherwise, ATM uses