MoniMax 5100T 7. Appendix
7-
41
Error Code
Cause
Handling
D110000
ENQ was not received from the host.
1. Contact to phone company
2. Contact to host
D120000
Transmission error : Failed to receive the
whole data within 5 seconds
after Inquireing the modem to send the
data.
1. Contact to phone company
2. Contact to host
D130000
NAK has been sent three times or more.
Failed in receiving the data due to parity
or LRC error. Therefore, sent NAK to the
host and Inquireed to send the data again
three times or more.
1. Contact to phone company
2. Contact to host
D150000
1. Modem dial connection time-out (while
dialing the modem)
2. No response from host for 60 seconds.
1. Try later
2. Contact to host and to phone company
D170X00
No carrier
No carrier during data transmission after
the modem is connected.
D180000
No dial tone
1. Check modem
D190000 No
Answer
1. Check phone number
2. Contact to telephone company and host
D200000 Dial(Line)
busy
1. Make a transaction later
2. Check ground phone line status
D210000
Response time-out (30 seconds) for
Modem Initialize command before
the modem was connected.
1. Check modem
D220000
EOT was not received from the host.
1. Check phone line status
2. Contact to host
D320000
1. Dial connecting time-out (60Sec) or
dial connection error
2. Host response message time-out
(60Sec).
1. Check phone line status
2. Contact to host
POWERAB UPS
ABNORMAL
1. Check UPS
POWERAC POWER OUT OR AC OFF
1. Check AC power status and environment
2. Check UPS
POWERBA BATTERY
LOW
1. Check AC power status and environment
2. Check UPS
(RBS-
LYNK)
Invalid Transaction/Amount.
Surcharge screen should have been
displayed.
Summary of Contents for MoniMax 5100T
