Nautilus Hyosung MoniMax 5100T, Operator'S Manual

Page: 263 / 279

MoniMax 5100T 7. Appendix
7-
47
F.2 Electronic Combination Lock
Please operate the lock or change the password only after fully understanding this
instruction
OPENING THE LOCK
1) Enter valid six (6) digit code at a time. (Factory default password : 123456)
2) The lock will signal a valid code entry with a double signal.
3) Within four (4) seconds, turn handle counterclockwise
to the open position.
4) Pull door open.
LOW BATTERY WARNING
● Repeated audio and visual signal (LED flashing and repeated
beeping) during opening indicates battery low.
AUDIO AND VISUAL SIGNAL
● Double signal (LED flashes and unit beeps) indicates entry is valid or accepted.
● Triple signal indicates invalid or not accepted.
WRONG TRY PENALTY
● Entry of four (4) consecutive invalid codes starts a 5-minute delay period.
- LED flashed red at five (5) second intervals.
● At the end of the delay period, two more consecutive invalid codes will restart an
additional 5-minute delay period.
CHANGING YOUR PASSWORD
1) Enter “zero” six times.
2) Enter your existing six (6) digit code one time.
3) Enter your NEW six (6) digit code two times.
4) If a mistake is made wait thirty (30) seconds and repeat steps 1. - 3.
5) Test lock operation several times before closing the door.
● Valid Code Entry - Double signal after valid six (6) digit code is entered.
● Invalid Code Entry - Triple signal and old code is still valid.