Nautilus Hyosung MoniMax 5100T Operator'S Manual Download Page 84

Page: 84 / 279

MoniMax 5100T 5. Operator Function

5-42

[Touch Machine]

[No Touch Machine]

5.5.4 PRINT LAST X

The PRINT LAST X function is used to print out recent journal data. If you want to print recent

journal data, enter the count of data you want on JOURNAL main screen and then press ENTER

key. Then the data you request is printed.

5.5.5 PRINT JOURNAL

The PRINT JOURNAL function is used to print out all saved journal data. If you want to stop

printing, you may stop it by pressing CANCEL key.

5.6 DIAGNOSTICS

Please see the “

Option A.1 DIAGNOSTICS of FRONT SUPERVISOR

” section.

5.7 REPORT

This report menu consists of 4 sub-menu, ERROR CODE, ERROR SUM, SW VERSION and

PRINT ALL SETUP. You can print out all information regarding each device as well as system

value set up. If you want to go back to the upper screen, just press the

CANCEL

key.

Summary of Contents for MoniMax 5100T























































































































































































































































































Search results

Summary of Contents for MoniMax 5100T

Reviews:

Related manuals for MoniMax 5100T

Brands by name

Popular brands

Nautilus Hyosung MoniMax 5100T, Operator'S Manual

Search results

Summary of Contents for MoniMax 5100T

Reviews:

Related manuals for MoniMax 5100T

Brands by name

Popular brands