MoniMax 5100T 7. Appendix
7-
27
Error Code
Cause
Handling
2010900
Dark sensing error before printing
1. Check the status of dark sensor(black mark
sensor)
2. Check whether dip switch # 6 is set or not
(Dip switch # 6 has to be turned on for not using
dark sensing)
2010A00
The size of image print data is abnormal
while printing image
1. Check the AP version and initialize
2080100
Receipt printer lever opened after printing 1. Close the lever of print head completely
2080200
TPH (Thermal Printing Head) overheated
after printing
1. Wait the time until the temperature of head
adequately slow down and try to initialize
2080300
Paper jam after printing, cutting paper or
discharging paper
1. Remove jammed paper between printer head
and rollers
2. Check and clean sensor
3. Replace sensor
2080400
Detecting no paper after printing (No
paper)
1. Replenish receipt paper
2. Check the status of sensor and its connctor
2080500
Detecting paper setting error after
printing
1. Check the status of paper setting
2. Check the sensor status and its connector
2080600
Command is received while doing self-
test
1. After terminating self-test and initialize receipt
printer
2080700
Detecting paper low (near end) after
printing
1. Replenish receipt paper
2. Check the status of Near End sensor and its
connctor
2080800 Paper
cutting
error
1. Check the Cutter module
2. Check if printer head lever is properly close
2080900
Dark sensing error after printing
1. Check the status of dark sensor(black mark
sensor)
2. Check whether dip switch # 6 is set or not
(Dip switch # 6 has to be turned on for not using
dark sensing)
2080A00
The size of image print data is abnormal
while printing image
1. Check the AP version and initialize
2DN0000
Failed to connect communication
between Receipt printer and SP
1.Check if communication cable or com port is not
connected
9720000
Communicate fail during opening printer
driver (PTR SP)
1. Check if communication cable or com port is not
connected
9722010
Communicate fail during opening printer
driver (PTR SP)
1. Check if communication cable or com port is not
connected
9722DN0
Failed to connect communication
between Receipt printer and SP
1. Check if communication cable or com port is not
connected
Summary of Contents for MoniMax 5100T
