Nautilus Hyosung MoniMax 5100T, Operator'S Manual

Page: 246 / 279

MoniMax 5100T 7. Appendix
7-
30
E.6 Miscellaneous
Error Code Cause Handling
1030100 Key data error from host 1. Contact to host
7000100
It’s impossible to read the version after
transferring to the CduSetup menu.
7000200
It’s impossible to read the version after
CDU Setup.
7000300
User’s setting values are different from
the actual written setting value.
9701010
Communication fail between PIN driver
(PIN SP) and pinpad
1. Check communication cable or com port is not
connected
9701012 Command sending fail to pinpad
1. Check communication cable or com port is not
connected
9701016 Data receiving fail from pinpad (EPP)
1. Check if communication cable or com port is
not connected
9701017 Data sending fail from pinpad (EPP)
1. Check if communication cable or com port is not
connected
9701031
Pinpad (EPP) configuration data reading
error 1. Reboot ATM
2. Re-install software
9701040
Failed to produce Thread for pinpad
(EPP) 1. Reboot ATM
2. Re-install software
9701060 Failed to create buffer for pinpad (EPP)
1. Reboot ATM
2. Re-install software
9701068
MapView of File Fail in Create
ShareMemory Method for EPP
1. Initialize Pin SP.
2. Call your attendant
9701070 Create Mutex Fail for SIU(Sensor)
1. Initialize Pin SP.
2. Call your attendant
9701102 COM handle is null for EPP
1. Initialize Pin SP.
2. Call your attendant
9701111 BCC error from pinpad (EPP)
1. Reboot ATM
2. Replace pinpad
9701150
Pinpad (EPP) is down when it receives
an 'Initializing’ command 1. Reboot ATM
2. Replace pinpad
9701151
Pinpad (EPP) is down when it receives
an 'Get Status' command 1. Reboot ATM
2. Replace pinpad
9701152
Pinpad (EPP) is down when it receives
an 'Clear Func Key' command 1. Reboot ATM
2. Replace pinpad
9707082
Failed the message transmission for the
fire event for VFD
ex) After connection is closed, an event
for the previous command is arrived.
It is a software error. On AP logic, check the event
for the command executed before closing
connection.