Nautilus Hyosung MoniMax 5100T, Operator'S Manual

Page: 95 / 279

MoniMax 5100T 6. Operator Function
6- 7
z
5. 5 Reset Configuration ID
P L E A S E W A I T . . C O M P L E T E D * Cancel Key to return
Reset configuration ID to download configuration data from host
z
5. 6 Denomination
* Cancel key to return
C S T 1 : $ _ P L E A S E W A I T . . . C O M P L E T E D
IF CST = 1 N E W V A L U E _
* Cancel key to return
C S T 1 : $ _ C S T 2 : $ _ P L E A S E W A I T . . .
IF CST = 2 N E W V A L U E _ N E W V A L U E _
* Cancel key to return
036
C O M P L E T E D
* Cancel key to return
Val + ENT
Val + ENT
Val + ENT
When LCU mode is used, each cassette must be set with the correct note type defined by
Data Processor
z
5.7 NoteValue
* Cancel Key to return
T Y P E A : $ _ T Y P E B : $ _ T Y P E C : $ _
N E W V A L U E _ N E W V A L U E _ N E W V A L U E _
T Y P E D : $ _ C O M P L E T E D * Cancel Key to return
N E W V A L U E _
Val + ENT
Val + ENT
Val + ENT
Val + ENT
There are four Note Types in NDC - NoteType1(=A), NoteType2(B), NoteType3(C), and
NoteType4(D) – and 8 Note Types in Diebold 91x – A,B,C,D,E,F,G, and H. The currency
and denomination must be set for each note type, and the correct information for this must
be informed from Data Processor. Here are two scenarios.
Scenario #1. A=USD 5, B=USD 10, C=USD 20, D=Not Used
< SET NOTE VALUE >
a. Enter 5 for note type 1(=A), and press ENTER
b. Enter 10 for note type 2(=B), and press ENTER
c. Enter 20 for note type 3(=C), and press ENTER
d. Press ENTER for note type 4(=D)