Nautilus Hyosung MoniMax 5100T, Operator'S Manual

Page: 54 / 279

MoniMax 5100T 5. Operator Function
5-12
4) RMS IP SETUP function is to set up information of host to connect with RMS. If you press
each button on this menu, you can set up various information.
[Touch Machine] [No Touch Machine]
Below items are to set up to communicate with RMS when supporting TCPIP
- USE URL function is to set up RMS address as IP or URL. If setting value is “ENABLE”, use
URL as RMS address. Otherwise, use IP as RMS address.
- RMS CONNECTION TYPE function is to set up whether to connect from ATM to RMS, or
from RMS to ATM. If setting value is “ACTIVE”, connect from ATM to RMS. Otherwise,
connect from RMS to ATM.
- NAME function is to set up RMS address. If “USE URL” is “ENBLE”, input URL of RMS. Up
to a maximum of 50 characters. Otherwise, input IP of RMS. Input 15 characters such as
XXX.XXX.XXX.XXX.(Refer to display for the details)
- RMS SEND INTERVAL function is to set up the time to send the status of the ATM to the
RMS periodically. Setting up the hours as the unit and setting up 4 hours as default. Be able
to input 1~24.
- ATM LISTENING PORT function is to set up required port number when connecting from
RMS to ATM. Setting up “5555” as default.
- RMS LISTENING PORT function is to set up required port number when connecting from
ATM to RMS. Setting up “9999” as default.
5) The PASSWORD function is used to set the RMS password to connect to ATM from RMS.
6) RMS CALL BACK OPTION function provides a function for only permitted ATM to connect to
RMS. The CALL BACK EN/DISABLE function is to set up whether to use RMS CAL BACK
function. If setting value is “ENABLE”, ATM makes a call to RMS using phone number