Nautilus Hyosung MoniMax 5100T, Operator'S Manual

Page: 261 / 279

MoniMax 5100T 7. Appendix
7-
45
2. EC -> Enter Shelved Mode Combination -> OPr
Enter the current Shelved Mode combination (either 50-25-50 or a changed Shelved Mode
combination) by sequentially pressing those digits on the lock keypad. The numbers will be
displayed on the LCD as they are entered.
3. OPr -> Retract Bolt
Turn the Dial to the right (CW) to retract the bolt
4. Open Door
5. Insert Change Key
Insert the change key into the change key socket on the back of the lock.
6. Extend Bolt
Turn the Dial to the left (CCW) to extend the bolt. Do not close the door
7. Power Lock -> ヒ EC
Turn the dial to the left(CCW) until
ヒ
EC (the Change Key symbol along with Enter
Combination) is displayed
8. ヒ EC -> Press #8 -> EcF
Press the “#” button followed by the “8” button. EcF (Enter combination, Factory) will be displayed.
9. EcF -> Enter Current Shelved Mode Combination -> EnF
Enter the current shelved mode combination, “EnF” (Enter combination, Factory) will be displayed.
10. EnF -> Enter New Combination -> Cnf
Select and enter the new combination. “CnF” (confirm new Factory combination) will be displayed
11. Cnf -> Enter New Combination -> POC
Enter new combination again to confirm. POC (Pull Out Change key) will be displayed.
12. POC -> Remove Change Key -> EOP
Remove the change key. EOP (End Operation) is displayed.