Nautilus Hyosung MoniMax 5100T, Operator'S Manual

Page: 81 / 279

MoniMax 5100T 5. Operator Function
5-39
static IP. If you change DHCP value from “ENABLE” to “DISABLE”, you should be setting up
static IP again in the ATM STATIC IP SETUP.
ATM STATIC IP SETUP is necessary to set up ATM information to connect to host using TCPIP.
Each menu is able to input up to 15 units such as XXX.XXX.XXX.XXX.
[Touch Machine] [No Touch Machine]
[NOTE]
In case of selecting “INSERVICE” on OP MAIN, if the value of DHCP(or IP, SUBNET MASK,
GATEWAY, DNS) is different from the original value of DHCP(or IP, SUBNET MASK, GATEWAY,
DNS) when entering in OP mode, exit OP and execute reboot.
5.4.4.8 RMS RING COUNT
This function is used to select how many ring of RMS will be generated by inputting button and
number
5.5 JOURNAL
This JOURNAL menu contains PRINT BY DATE, RRINT BY INDEX, VIEW, PRINT LAST X and
PRINT JOURNAL sub menu.
In this Journal menu, you can print it by date and index what you want to search and just take a look
at it by pressing VIEW sub menu.