MoniMax 5100T 7. Appendix
7-
62
I. Software Installation Guide for Dial-up
I.1 General Information
The Chapter describes how field technicians can successfully apply the new Software to field ATMs
avoiding mistake during installation. This manual is targeting for CSP emulation MoniMax5100T and
converting from Visa-II image to NDC emulation Software because NDC only ghost image CDs are not
published at this time.
1) Expected Failures
During installation if there is any trouble, you may suspect one or more of following failures:
- HDD has bad sectors.
- HDD has capacity less than 80 Gbytes with enhanced IDE type specification.
(For MoniMax5100T(NH-5040), at least 30 Gbytes HDD should be connected.)
- SATA(Serial type) HDD will not be recognized by the current mother board.
- CD-ROM driver is not cleaned to read CDs.
- CD surface has damaged or scratched tracks.
- Wrong Ghost Image CD for different mother board Types (848 or 852 main board)
- Forgotten to disable watchdog board to prevent resetting CPU every ten minutes.
2) Preparation Kits
a. VIA B/D Ghost CD Set for MoniMax5100T (NH-5040): (1 CD) , Version V01.03.01
b. Cross type Screw Driver: 1 Ea.
3) Things to know
- The current released dial-up version of Software with Triton Emulation supports pre-dialing which
was demanded by customer.
** It is very important to print the current ATM’s configuration before start installation
with old Software because ghost image CD will delete all information at the current
HDD and show default data after completion. Furthermore, you will have to do
balancing to close transactions occurred by the time. Turn off the power at the end.
Summary of Contents for MoniMax 5100T
