MoniMax 5100T 7. Appendix
7-
63
I.2 Dial-up Ghost Image CD Installation for MoniMax5100T (VIA Main Board)
1) Unplug watchdog board cable is not necessary for MoniMax5100T (NH-5040)
Unlike 848 and 852 boards, MoniMax5100T’s Via board requires only one CD which can finish CD
installation in 10 minutes. Thus, there is no necessary for you to unplug watchdog cable or find red
switch on the cage.
2) Connecting ADA Board cable is not necessary
Unlike 9030 model, MoniMax5100T(NH-5040)’s ADA is run by playing Wav file. The text to speech
ADA board is not present on MoniMax5100T(NH-5040).
3) PS/2 keyboard is not necessary
Because only one CD is needed to install, there is no keyboard need.
4) Set Receipt printer DIP Switch
Most MoniMax5100T’s receipt printer DIP switch are set as picture from factory. If the setting is
differed, please set No2 at off position only.
[Fig. 7.8 Receipt Printer’s DIP Switch Setting]
5) Turn on the power and insert the 1
st
CD
Now you are ready to install the ghost CD. Please turn on the power and insert the CD and wait
until the Ghost program is completed.
6) Pull the CD and reboot the system
- About over 8 minutes later, the installation is completed by displaying black screen.
- Remove the CD and turn off/on the system.
- After machine is booted up, press “66” on rear panel for entering front operator menu.
Enter the password “555555” for entering operator mode.
- Enter all configurations on 5. Configure – Host Setup or – Customer Setup menu.
Triton’s communication ID is located under “Customer Setup” menu.
- Exit the operator menu by pressing “99” or reboot by “23”.
Summary of Contents for MoniMax 5100T
