Talos T6/T8
TM
Coupon Guide
Flashes
Meaning
10
Configuration coupon accepted and unit successfully programmed.
1 - 5
Coupon rejected. Number of flashes corresponds to the coupon section that was
improperly filled out. Try again.
7
Coupon not read. Confirm the coupon correct and try again.
This spac
e is lef
t in
ten
tionally blank
.
Initiating Coupon Mode
1. Remove the bill magazine
2. Use a pencil or a screwdriver to press
this button to enter configuration mode,
then reattach the bill magazine to
initiate Coupon mode:
When coupon mode is activated, the bezel lights will rapidly flash
1. Insert a completed configuration coupon
2. Watch the bezel LEDs and count the flashes when the configuration coupon is returned
3. Use this chart to confirm successful programming:
Carefully cut coupon from this page or make one copy of this coupon.
Copies are usable if made on a standard, carbon-based copier. Make one copy of the original at a
time, as copiers tend to reduce the size of the coupon when multiple copies are made.
Fill out the coupon using a #2 (HB) pencil. Fill in one block for each line. Do not mark the back of
the coupon.
Note that Talos units are preconfigured with the following options enabled:
–
Bill Ways Accepted: Four Way
–
T6 Bills Enabled: $1 - $20
–
T8 Bills Enabled: $1 - $100
–
Pulse Width: Gaming Short
–
Pulses Per Dollar: One
–
Interface Mode: Harness Enable
–
Acceptance Mode: Mode Zero
253158027 G1
