Print actual size
66mm
156mm
Coupon Sections
1
- Face up in one direction (green seal
first)
2
- Face up in either direction
4
- Face up or down in either direction
Section 1 - bill ways
Other Documentation
All support documentation, including a downloadable copy of this coupon, can be found
at Cranepi.com/support.
Scan
Log in
Tap Support
Use the filters
or scroll to find
Talos
Tap
Then
Choose your
Document
View Downloads
Tap
Add a Product
Then
And select
My Library
Section 4 - Pulses Per Dollar
Credit pulses per dollar accepted,
check with your machine manufac-
turer for details.
Harness Enable
- requires an input
from the controller to enable and accept
bills.
Always Enable
-
allows for
acceptance at all times, a host or
controller cannot disable the unit.
Section 5 - Interface mode
Fill in on or off to enable or disable a
bill.
Section 2 - Bill enables
$50 and $100 - T8 Models Only
Fill in on or off to enable or disable a
bill.
Section 6 - Acceptance mode
Mode 0 is default. Increasing
Acceptance Mode increases security,
but may also impact performance.
Please contact CPI Technical Support
for details.
Flashes
Meaning
10
The bill or vend coupon has been enabled successfully
7
The bill validator was unable to read the bill or vend coupon. Try again.
3
The bill or vend coupon has been disabled
Follow the same process to program the Talos with bills or free vend coupons, but note that the
LED codes are slightly different:
Free VEnd Coupons and Bill programming
Cut carefully on the dotted line. The coupon
should be the same size as an American bill when
complete.
Section 3 - Pulse Width
Sets the width of the pulse, check with
your machine manufacturer for details.
