Nautel VX150, Operation & Maintenance Manual

Page: 90 / 179

VX150 TO VX2 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 1.0 2022-12-08 PAGE 2.2.73
Click Save to activate changes. Click Cancel to cancel changes and return to the Remote Inputs screen.
Channel Control options Description
Unassigned Unassigned No logic setting.
RF On/Off Rising Edge, Activate Logic ‘1’ (high or rising edge) activates the input.
Falling Edge, Activate Logic ‘0’ (low or trailing edge) activates the input.
Rising Edge, Deactivate Logic ‘1’ (high or rising edge) de-activates the input.
Falling Edge, Deactivate Logic ‘0’ (low or trailing edge) de-activates the input.
Rising Edge, Toggle Logic ‘1’ (high or rising edge) activates the input; next logic ‘1’
(high or rising edge) de-activates the input.
Falling Edge, Toggle Logic ‘0’ (low or trailing edge) de-activates the input; next
logic ‘0’ (low or trailing edge) activates the input.
Active High, Turn On. Active
Low, Turn Off. Logic ‘1’ (high) causes an RF on. Logic ‘0’ (low) causes an RF
off.
Active High, Turn Off. Active
Low, Turn On. Logic ‘1’ (high) causes an RF off. Logic ‘0’ (low) causes an RF
on.
Preset 1/2 Active Rising Edge, Set Logic ‘1’ (high or rising edge) selects the preset.
Falling Edge, Set Logic ‘0’ (low or trailing edge) selects the preset.
Active High, Activate Logic ‘1’ (high) activates the preset.
Active Low, Activate Logic ‘0’ (low) activates the preset.
RF Power Adjust Rising Edge, Increase Logic ‘1’ (high or rising edge) causes a power increase.
Falling Edge, Increase Logic ‘0’ (low or trailing edge) causes a power increase.
Rising Edge, Decrease Logic ‘1’ (high or rising edge) causes a power decrease.
Falling Edge, Decrease Logic ‘0’ (low or trailing edge) causes a power decrease.
Active High, Increase Logic ‘1’ (high) causes a power increase.
Active Low, Increase Logic ‘0’ (low) causes a power increase.
Active High, Decrease Logic ‘1’ (high) causes a power decrease.
Active Low, Decrease Logic ‘0’ (low) causes a power decrease.
Alarm Reset Rising Edge, Reset Logic ‘1’ (high or rising edge) causes a reset.
Falling Edge, Reset Logic ‘0’ (low or trailing edge) causes a reset.