Nautel VX150, Operation & Maintenance Manual

Page: 106 / 179

VX150 TO VX2 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 1.0 2022-12-08 PAGE 2.2.89
Network View and/or set network information such as MAC address (view
only), DHCP on/off status, IP address, netmask and gateway.
page 2.2.100
Presets - Select Select and activate a user-defined preset. page 2.2.103
Presets - Edit Edit the selected preset’s parameters. page 2.2.104
Presets - Create Creates a new preset. page 2.2.105
Presets - Clone Saves a copy of an existing preset. page 2.2.117
Presets - Delete Deletes the selected preset. page 2.2.118
Settings - System - Time Allow the user to set edit Clock, Date and enable NTP. page 2.2.120
Settings - System - Time - NTP Sync Enables time to be NTP synchronized. page 2.2.121
Settings - System - Time - Set Clock Set time of day. page 2.2.121
Settings - System - Time - Set Date Set the date. page 2.2.122
Settings - System - Transmitter
Name Edit the transmitter’s name. page 2.2.122
Settings - System - Display
Brightness
Edit the brightness of the Front Panel UI. page 2.2.123
Settings - System - Sleep Timer Edit the Sleep Timer. page 2.2.123
Settings - System - Orban Inside
Present Enable or Disable Orban Audio processor hardware. page 2.2.124
Settings - Transmitter - Translator Allows the transmitter to be used as a translator to re-broadcast
primary information as a secondary station on an alternate
frequency. page 2.2.126
Settings - Transmitter - Signal
Generator
Enable/disable and setup the internal signal generator. page 2.2.127
Settings - Transmitter - Forward
Low
Set the low forward power and very low forward power
thresholds.
page 2.2.128
Settings - Transmitter - Exciter
VCXO
Calibrate the internal clock to a user supplied external high
precision 10 MHz clock reference.
page 2.2.130
Settings - Transmitter - Remote I/O Configure the remote inputs, remote outputs, and analog outputs
for the transmitter.
page 2.2.130
Settings - Transmitter - Calibration
Menu Set calibration values for various parameters (e.g., forward/
reflected power, program input levels, etc.).
page 2.2.133
FPUI Screen Function See page