Nautel VX150, Operation & Maintenance Manual

Page: 59 / 179

VX150 TO VX2 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 2.2.42 VERSION 1.0 2022-12-08
CT= 4A date/time enable If set to 1, the exciter will broadcast a 4A RDS packet on the edge of every minute with
the currently set UTC time/date. This is a volatile setting.
Example: CT=1
DPS= Dynamic Program
Service (scrolling
command)
64-character ASCII string typically describing the radio station.
Example: DPS=Q104-FM The Home of Rock N Roll
DPSR= Dynamic Program
Service Rate (scrolling
command)
Number, from 0 to 2, describing the scrolling rate.
0 is off (default); the PS= command is displayed when DPSR=0 is used.
1 is slow; the DPS string will scroll at a rate of approximately 10 s.
2 is fast; the DPS string will scroll at a rate of approximately 3 s.
Example: DPSR=2
DPSM= Dynamic Program
Service Mode
(scrolling command)
Number, 0 or 1, describing the scrolling mode.
0 is word-scrolling; the DPS string will scroll word by word, or multiple words when
they fit.
1 is character-scrolling; the DPS string will scroll character by character.
Example: DPSM=0
REV Software Version
(special command)
Typing this command (no = or ?) returns the current RDS encoder software version.
Example:
REV // issue version command
Nautel NVE RDS Encoder V1.0 // exciter response
Setting Name Description/Example