Nautel VX150, Operation & Maintenance Manual

Page: 89 / 179

VX150 TO VX2 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 2.2.72 VERSION 1.0 2022-12-08
Figure 2.2.45: Input Editing Menu
Select Input Channel
From the editing screen for remote input 1 through 7, you can configure the input for one of a variety of
channel inputs. Click the Channel field’s up/down arrows to display the following options:
 Unassigned. No effect on transmitter operation, regardless of logic level.
 RF On/Off. Same as pressing the RF On (telling the system to provide RF power, if possible) or
the RF Off button on the FPUI. There are two inputs configured by default; one for Falling
Edge, Activate and one for Falling Edge, Deactivate.
 Preset 1 Active: Selects preset 1 as active.
 Preset 2 Active: Selects preset 2 as active.
 RF Power Adjust. Activating these inputs will increment/decrement the current preset power
level by 1% of the rated power. Holding the selection will increment/decrement the power
level by 1% every 1/2 second. There are two inputs configured by default; one for Falling
Edge, Increase and one for Falling Edge, Decrease.
NOTE : If multiple power increase or
decrease inputs are active, the lower number input takes precedence.
 Alarm Reset. Initiates an reset for latched alarms. Same as initiating an Alarms Reset from the
FPUI’s main menu.
Click Save to activate changes. Click Cancel to cancel changes and return to the Remote Inputs screen.
If you save a change to a remote input via the AUI, it will also be displayed on the FPUI.
Configure Input Control Logic
From the editing screen for remote input 1 through 7, you can configure the input’s active/inactive
control logic. Click the Control field’s up/down arrows to display the following options, noting the
options differs for each Channel input: