Nautel VX150, Operation & Maintenance Manual

Page: 88 / 179

VX150 TO VX2 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 1.0 2022-12-08 PAGE 2.2.71
Remote I/O
The Remote I/O page allows the user to configure the remote input/output interface for the transmitter.
Refer also to the VX150 to VX2 Installation Manual for information on remote inputs and outputs and
their factory default settings.
 Digital Inputs (see Digital Inputs )
 Digital Outputs (see Digital Outputs on page 2.2.74 )
 Analog Outputs (see Analog Outputs on page 2.2.76 )
Digital Inputs
Using the Digital Inputs page (see Figure 2.2.44 ), you can configure up to seven inputs that allow you to
remotely control various operational characteristics of the transmitter. Unless otherwise noted, these
inputs are only accepted by the transmitter if remote control has been enabled. That setting can only be
made by a local user using the front panel UI’s REMOTE button (its LED is green when remote is
enabled). Nautel sets remote input defaults prior to shipping. See the Installation Manual for details.
Figure 2.2.44: Remote I/O - Digital Inputs Page
The current settings for Input 1 through Input 7 are displayed, including the Channel and Control
settings, as well as the current logic Level (1 or 0). You can edit Channel and Control settings by clicking
the edit icon for the desired input. This displays the menu in
Figure 2.2.45 on page 2.2.72 .
Edit