manualshive.com logo in svg

Nautel VX150, Operation & Maintenance Manual

Share
Download
Nautel VX150 Operation & Maintenance Manual Download Page 161

VX150 TO VX2 OPERATIONS & MAINTENANCE MANUAL

OPERATING THE TRANSMITTER

PAGE 2.2.144

VERSION 1.0  2022-12-08

Nameplate License

The Nameplate License screen allow the user to assign a Nautel provided License key to the transmitter 
in the event the SD card becomes corrupted. See

 

Figure 2.2.131

.

Figure 2.2.131: Nameplate License

Use the Front Panel rotary knob to select the Nameplate License field and press the knob to enter the 
editing menu (see 

Figure 2.2.132

). Press the Back button to abort editing and return to the previous 

setting. 

Figure 2.2.132: Nameplate License - editing screen 

To enter a Nameplate License, use the Front Panel rotary knob to select the characters for the 
nameplate license name provided. Press the Front Panel rotary knob to save the changes. Press the 
Cancel button to discard the changes and return to the previous setting.

Summary of Contents for VX150




















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands