manualshive.com logo in svg

Nautel VX150, Operation & Maintenance Manual

Share
Download
Nautel VX150 Operation & Maintenance Manual Download Page 156

VX150 TO VX2 OPERATIONS & MAINTENANCE MANUAL

OPERATING THE TRANSMITTER

VERSION 1.0  2022-12-08

PAGE 2.2.139

FM Polarity

Allows the user to invert the polarity of the frequency modulation (ie. positive going modulation signal 
yields positive deviation; or positive going modulation yields negative deviation). Options are Normal 
(default) or Inverted. Use the Front Panel rotary knob to select Normal or Inverted and press the Front 
Panel rotary knob to select. Press the Cancel button to return to discard any changes. See 

Figure 2.2.124

.

 

NOTE

: 

Make sure that the RF stage is disabled (RF off) before changing the FM Polarity setting. If not, a 

message will appear prompting you to do so.

Figure 2.2.124: FM Polarity

Ext 10 MHz Input

Allows the user to enable/disable the External 10 MHz input. See 

Figure 2.2.125

). Use the Front Panel 

rotary knob to edit the slider setting to Enabled (I) and press the Front Panel rotary knob to select. The 
Ext 10 MHz Input slider will turn green when enabled. Press the Back button to return to the previous 
menu.

Figure 2.2.125: Ext 10 MHz Input

Summary of Contents for VX150




















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands