Nautel VX150, Operation & Maintenance Manual

Page: 27 / 179

VX150 TO VX2 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 2.2.10 VERSION 1.0 2022-12-08
Logging into the AUI
The transmitter’s AUI provides a means to restrict access to transmitter control functions to authorized
users only. There are user accounts that can be pre-defined to set access restriction from read-only (no
control) to full-administrative control.
Access the AUI using a web browser as follows:
1. Configure your network settings (see Network on page 2.2.54 ).
2. On your router or firewall software, open port 80 and close (restrict access to) all other ports. If you
are using RDS data, open port 7005. If you are using SNMP, open port 161 (Agent) or 162 (Traps).
SSL requires port 443.
3. When properly configured as noted above, the login menu (see Figure 2.2.4 on page 2.2.11 ) will
appear in your web browser when the IP address is accessed. Your IP address and any login
messages appear in a box at the top, beside the logo.
If the login menu does not appear, then your login may not be properly configured and you should
consult the documentation for the User Accounts page (
Users on page 2.2.67 ).
4. The AUI has two predefined user accounts: Admin and Viewer. The Admin account has full
permissions on the transmitter, while the Viewer account can only view AUI pages and cannot
make any changes. The default passwords for these logins are:
• Admin: change_me
•
Viewer: <blank>
5. Log in to the AUI by entering the appropriate parameters in the login window.
• In the Language field, click the down-arrow to review a drop-down menu displaying the
available language options, and select one.
• In the User field, enter the administrator user name "Admin”.
• In the Password field, enter the password. Default is "change_me”. Click on the eyeball icon to
see the characters of the password.