manualshive.com logo in svg

Nautel VX150, Operation & Maintenance Manual

Share
Download
Nautel VX150 Operation & Maintenance Manual Download Page 101

VX150 TO VX2 OPERATIONS & MAINTENANCE MANUAL

OPERATING THE TRANSMITTER

PAGE 2.2.84

VERSION 1.0  2022-12-08

Upgrades

The Upgrades page (see

 

Figure 2.2.54

) in the Software menu allows for uploading a suite of software 

upgrade files (.tgz files) via remote connection. Navigate the page as described below.

For detailed information on performing a software upgrade, refer to 

Software Upgrade via Remote AUI on 

page 2.4.5

.

Figure 2.2.54: Software - Upgrades

The Upgrades page consists of the following sections and buttons:

Current Version: displays the current version of software.

Browse: allows for browsing and selection of the software upgrade file.

Select upgrade for installation: displays the available upgrade files uploaded to the 
transmitter.

Upload: uploads the selected file in the From field to the Select upgrade for installation area.

Refresh List: refreshes all the available software files in the display area.

Start Upgrade: initiates the upgrade to the software file selected.

Delete Upgrade File: deletes the selected software file from the Select upgrade for installation 
area.

Summary of Contents for VX150




















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands