Nautel VX150, Operation & Maintenance Manual

Page: 46 / 179

VX150 TO VX2 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 1.0 2022-12-08 PAGE 2.2.29
Both methods will indicate the current active preset, by a green check mark next to its radio button
(e.g., Example Preset 3, see
Figure 2.2.18 on page 2.2.28 ). If the current preset is not the desired one,
click the radio button of the desired preset in the Available Presets list, or create a new preset or
clicking the Clone Preset button and edit the preset.
If you select an alternate active preset, a confirmation prompt will appear. Select Close to cancel or
Continue to activate the selected preset. Press the Delete button to delete the selected preset. Users
cannot delete the current "active" (operational) preset or any preset that is referenced in the Remote
I/O menu as either a remote input or output. Those links in the Remote I/O menu must be deleted
before the associated preset can be deleted. Press Cancel to return to the Presets page.
Editing or creating presets using the AUI
When a presets page is opened from the main menu, the operational settings of the transmitter are
displayed. They define the current operational state of the transmitter. Operational settings can be
edited and then immediately activated by pressing the Save button.
Any preset can be renamed, regardless of the transmitter status, using the Edit function and saving the
changes.
To edit a saved preset, you must load that preset from the Presets page (see Editing or creating presets
using the AUI on page 2.2.29 ). Editing the active preset will immediately update the transmitter’s
operational settings.
NOTE
:
When editing saved User presets, the best practice is to load a preset that is close to the desired
configuration and then adjust its settings for the exact configuration.
In the Presets screen or top banner (see Figure 2.2.18 on page 2.2.28 ), a green checkmark appears next
to the preset name to indicate which is the active preset.
When changes are complete, press the Save button.
Parameters that can be edited are discussed in detail below.
To remove a preset, select it and press the Delete button.
NOTE
:
If only one preset is available, assigned in the Preset Scheduler or assigned in Remote I/O, it
cannot be deleted.
When editing saved User presets, the best practice is to load a preset that is close to the desired
configuration and then adjust its settings for the exact configuration.
To ignore any changes, press Cancel to return to the Presets screen.