manualshive.com logo in svg

Nautel VX150, Operation & Maintenance Manual

Share
Download
Nautel VX150 Operation & Maintenance Manual Download Page 42

VX150 TO VX2 OPERATIONS & MAINTENANCE MANUAL

OPERATING THE TRANSMITTER

VERSION 1.0  2022-12-08

PAGE 2.2.25

Alarms

You can view the VX150 to VX2’s operational status using the AUI’s Alarm page. This page shows 
current active alarms to aid in fault diagnosis. To view, click the 

Alarms

 button in the AUI’s main menu. 

See 

Figure 2.2.16

.

You can also use the front panel UI to view active alarms (see 

Alarms on page 2.2.91

).

Figure 2.2.16: Alarms page

The Alarms page displays all active transmitter alarms. Alarms are listed by their host device (Controller 
or Exciter) and alarm name. Refer to the VX150 to VX2 Troubleshooting Manual for detailed 
information on alarm details such as root cause and troubleshooting tips.

Click the Reset Latched Alarms icon at the top, left of the Alarms screen to attempt to clear any latching 
alarms that are holding the transmitter in an “off-air” state. If the offending alarm has cleared, the 
transmitter should resume operation.

Click the Reports icon at the top, left of the Alarms screen to go to the Reports screen where the user 
can see or download the event history. See 

Reports on page 2.2.77

.

The Alarms Filter icons allow you to hide alarms that you do not want to see. To hide a specific alarm 
click its alarms filter icon. To toggle hide/show for hidden alarms click the filter icon next to the Reset 
Latched Alarms icon.

Reports

Reset Latched Alarms

Alarms Filter

Summary of Contents for VX150




















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands