manualshive.com logo in svg

Nautel VX150, Operation & Maintenance Manual

Share
Download
Nautel VX150 Operation & Maintenance Manual Download Page 150

VX150 TO VX2 OPERATIONS & MAINTENANCE MANUAL

OPERATING THE TRANSMITTER

VERSION 1.0  2022-12-08

PAGE 2.2.133

Figure 2.2.115: Analog Outputs

Calibration Menu

Allows the user to calibrate various parameters, such as audio inputs and power levels. Select 
Calibration from the Settings Menu (see

 

Figure 2.2.116

).

Figure 2.2.116: Calibration Menu

Use the Front Panel rotary knob to select the desired setting and press the knob to make changes. With 
the appropriate calibrated source applied, use the Front Panel rotary knob to set the new calibration 
value for the selected input. Press the Back button to discard any changes.

WARNING! 

Calibration settings are established at Nautel and should not 

require any adjustment. Contact Nautel before making changes.

Summary of Contents for VX150




















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands