Nautel VX150, Operation & Maintenance Manual

Page: 144 / 179

VX150 TO VX2 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 1.0 2022-12-08 PAGE 2.2.127
Figure 2.2.105: Translator
Signal Generator
To enable the test signal generator output, (see Figure 2.2.106 on page 2.2.128 ), select Signal
Generator from the Settings -> Transmitter menu. Use the Front Panel rotary knob to select the type of
waveform desired and press Save. Press Cancel to discard the changes and return to the previous menu.
The Signal Generator options are:
• None
• Sine Wave
• Sine Sweep
• Band-Ltd Noise
Use the Front Panel rotary knob to edit the desired waveform parameters, press the Front Panel rotary
knob to enter changes and press the Back button to discard the change and return to the previous
menu. See
Figure 2.2.107 on page 2.2.128 , Figure 2.2.108 on page 2.2.128 and Figure 2.2.109 on page
2.2.129 .