natus Camino ICP, User Manual

Page: 19 / 148

19
List of Warnings for Using the Monitor
Failure to observe one or more of the following warnings could compromise patient safety or result in
measurement errors.
Warnings
• Use of the Camino ICP Monitor is restricted to one patient at a time.
• The Camino ICP Monitor and its accessories are contraindicated for use in a Magnetic Resonance (MR)
environment.
• Always verify the high ICP alarm limit is set appropriately for each patient prior to treatment.
• Selecting the Alarm Off feature on the Alarm panel will disable the high ICP alarm limit indefinitely. Use caution if
this feature is selected. To re-enable this alarm, press the Alarm On and Accept buttons.
• No modification of the Camino ICP Monitor is allowed.
• The Camino ICP Monitor is a sensitive electronic device. When using the monitor, always handle with care. If
damage is suspected, contact Natus Neuro.
• Read the user’s manual from the patient bedside monitor’s manufacturer before connecting the Camino ICP
Monitor to a patient bedside monitor.
• To prevent injury to the patient, user, or other persons, or damage to the monitor, always verify that the monitor
is clamped securely to the equipment pole.
• To prevent injury to the patient, user, or other persons, or damage to the monitor, make sure to position the cables
so that they are free from all foot traffic.
• Care should be taken if the equipment is used adjacent to or stacked with other equipment; if adjacent or stacked
use is inevitable, the equipment should be observed to verify normal operation in the configuration in which it will
be used.
• Do not block the alarm speaker with any materials that might muffle the alarm sound.
• To reduce the risk of electric shock, do not disassemble the Camino ICP Monitor. Refer all servicing to qualified
service personnel at Natus Neuro.