natus Camino ICP, User Manual

Page: 140 / 148

140
Test specifications for ENCLOSURE PORT IMMUNITY to RF wireless communications equipment
Test frequency
(MHz)
Band
a
(MHz)
Service
a
Modulation
b
Maximum
Power
(W)
Distance
(m)
Immunity Test level
(V/m)
385 380-390 TETRA 400
Pulse Modulation
b
18 Hz
1.8 0.3 27
450 430-470 GMRS 460,
FRS 460
FM
c
± 5 kHz deviation
1 kHz sine
2 0.3 28
710
745
780
704 – 787 LTE Band 13,
17
Pulse modulation
b
217 Hz
0.2 0.3 9
810
870
930
800 – 960 GSM 800/900,
TETRA 800,
iDEN 820,
CDMA 850,
LTE Band 5
Pulse modulation
b
18 Hz
2 0.3 28
1720
1845
1970
1700 – 1990 GSM 1800;
CDMA 1900;
GSM 1900;
DECT;
LTE Band 1, 3,
4, 25; UMTS
Pulse modulation
b
217 Hz
2 0.3 28
2450 2400 – 2570 Bluetooth,
WLAN,
802.11 b/g/n,
RFID 2450,
LTE Band 7
Pulse modulation
b
217 Hz
2 0.3 28
5240
5500
5785
5100 – 5800 WLAN 802.11
a/n
Pulse modulation
b
217 Hz
0.2 0.3 9
NOTE If necessary to achieve the IMMUNITY TEST LEVEL, the distance between the transmitting antenna and the ME
EQUIPMENT or ME SYSTEM may be reduced to 1 m. The 1 m test distance is permitted by IEC 61000-4-3.
a For some services, only the uplink frequencies are included.
b The carrier shall be modulated using a 50 % duty cycle square wave signal.
c As an alternative to FM modulation, 50 % pulse modulation at 18 Hz may be used because while it does not represent actual
modulation, it would be worst case.