natus Camino ICP, User Manual

Page: 36 / 148

36
Attaching to Equipment Pole (if applicable)
The Camino ICP Monitor includes a clamp for attaching the monitor to an equipment pole. To attach:
1. On the rear of the monitor, fit the pole clamp around the equipment pole.
2.
Tighten the knob on the pole clamp to secure the monitor to the equipment pole.
1 Clamp 2 Pole
Note that the pole clamp supports equipment poles between 0.5 and 1.2 inches (12.7 and 30.5 mm) in diameter.
Warning
To prevent injury to the patient, user, or other persons, or damage to the monitor, always verify that the monitor is clamped
securely to the equipment pole.
Caution
To prevent liquid from dripping inside the monitor and damaging the internal components, do not mount the monitor
underneath an I.V. bag or tube feed. If liquid does drip onto the monitor, dry the monitor immediately.