natus Camino ICP, User Manual

Page: 58 / 148

58
About the Synchronize to Monitor Button
If you are planning to display patient data from the Camino ICP Monitor to a patient
bedside monitor, press the Synchronize to Monitor button to initiate the process of
synchronizing the two monitors with each other. This process ensures that both
monitors are displaying identical ICP values for the patient. Note that this feature
provides synchronization checks at 0 mmHg, 25 mmHg, 50 mmHg, and 100 mmHg.
Pressing the Check Additional Values button each time will advance to the next
measurement. For instructions on synchronizing the monitors, see Chapter 4.
Reviewing the Status Bar
When using the Camino ICP Monitor, the status bar on the bottom of the touch screen will display messages to
indicate the current states of alarms, catheters, and AC/battery power.
Status bar
Verifying Status of Battery and AC Power
The Camino ICP Monitor may be powered by either AC power or battery charge. To determine the status of power
for the monitor, view the battery and plug symbols that appear on the bottom right of the touch screen:
Symbol Status
Indicates AC power is being used.
Indicates AC power is not being used/available.
Indicates battery power is being used to power the monitor. Each green bar
represents the level of remaining battery charge (see following section).
Indicates AC power is being used to charge the battery.
Indicates that either a battery is not connected or a battery is not functioning
properly.
For instructions on powering the monitor, see Chapter 3.