manualshive.com logo in svg

Native Instruments Groove production studio, Manual

Share
Download
Native Instruments Groove production studio Manual Download Page 71

4.2.6

Page 6: Velocity Destination and Modwheel Destination

 

Sampler VELOCITY DESTINATION on the hardware.

Sampler Velocity Destination on the software.

Velocity Destination

Velocity Destination Controls

 

Start

This is a built-in modulation source that allows you to modulate the sam-
ple Start parameter on page 2 based on the input velocity. Positive values
shift the sample start position later in time as you play harder, negative
values shift it closer to the beginning of the sample as you play harder.

Tip: a typical example for this parameter is setting it so that the initial at-
tack transient of a snare drum is heard only at high velocity values. This
makes it sound “snappier” when you play hard, and “mushier” or muted

when you play softly.

Decay

This allows you to modulate the 

Decay

 parameter of the Amplitude Enve-

lope on page 2 by using Velocity.

Cutoff

This allows you to modulate the 

Cutoff

 parameter of the Filters with filter

types LP, HP, BP (on page 3).

Volume

This allows you to modulate volume, which is what Velocity normally is
used for.

Sound Slots

The Sampler Parameters in Module 1

 

MASCHINE - Manual - 71

Summary of Contents for Groove production studio
























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands