2.2.6
Navigating Parameter Pages in the Control Area
In some situations, the Control area consists of more parameters than the displays can show at
once. Examples of this are the Groups’ Output tab (
OUT
on the controller) and the Sounds’
Source tab (
SRC
on the controller) if set to Sampler. In these cases, the number of Parameters
is divided into several Parameter pages that you can easily navigate with the hardware and
software.
Hardware
On the MASCHINE hardware controller you can use the Page buttons to navigate through the
Parameter pages. Whenever there is more than one page, it will be shown on the right side of
the right display like this:
The display of available 1/6 pages in a Group Output tab.
Moreover, if there is another page available to the left or to the right of the current page, the
corresponding Page button will be lit on your MASCHINE hardware controller.
Software
On the software you click the Parameter Page selector to navigate through the pages:
The Parameter Page selector in the Control area: first page of parameter settings for Module 1.
Basic Concepts
Common Operations
MASCHINE - Manual - 22
