Native Instruments Groove production studio Manual Download Page 111

Page: 111 / 247

Duplicating a Pattern
To duplicate a Pattern select it by pressing its corresponding pad in Pattern mode, then press
Button 3 (

DUPL

). The Pattern will be copied to the next empty Pattern slot available.

Copy and Paste a Pattern
To copy a Pattern to another Pattern slot, press

DUPLICATE

PATTERN

, press the pad of the

Pattern you want to copy, and then the target pad for the Pattern copy.

Removing a Pattern
Pressing Button 4 removes the Pattern from the current Scene (Scenes are described in detail
at chapter

↑

10, Creating a Song using Scenes

). Note that it does not delete the Pattern!

Pattern Length
The Pattern Length can be adjusted in Pattern mode by dialing Knob 1. The units available
here depend upon the setting of the

LEN

(Pattern Length) parameter in Grid mode. See chap-

ter

↑

6.1.12, Step Grid, Pattern Length Grid and Quantization

for further information.

6.1.2

Pad Mode

Pad mode is reached by pressing

PAD MODE

. It is a temporary mode and can therefore be

locked by pressing

PAD MODE

together with Button 1. In Pad mode you make settings on the

left display, and on the right display you will either see your Sounds or, if in Piano Roll/Key-

board mode, the notes. You can switch to 16 Velocities mode, then the velocity value of the

pads will be shown on the right display. This page will allow you to enable Input Quantize so

that your playing is immediately quantized to the current Grid value. Pad mode also allows you

to select a fixed velocity value for the pads so that the selected Sounds (like drums) will play
at the same volume no matter how hard you hit the pads.

The Pad mode on the hardware.

Working with Patterns (Hardware)

Creating Patterns

MASCHINE - Manual - 111

Summary of Contents for Groove production studio
























































































































































































































































Search results

Summary of Contents for Groove production studio

Reviews:

Brands by name

Popular brands

Native Instruments Groove production studio, Manual

Search results

Summary of Contents for Groove production studio

Reviews:

Brands by name

Popular brands