manualshive.com logo in svg

Native Instruments Groove production studio, Manual

Share
Download
Native Instruments Groove production studio Manual Download Page 205

The Record page on the hardware displays.

Display Element

Description

SOURCE

You can select the Source by using Knob 1: it can be either set to Extern
for audio signals connected to your audio interface, or Intern for audio sig-

nals from MASCHINE itself (either from another Group or from the Master

Output).

INPUT

Using Knob 2 you can choose between the available Inputs. If 

EXTERN

 is

selected, you can choose the external input of MASCHINE: 

IN 1 L

,

 IN 1 R

,

OR 

IN 1 L + R

. If 

INTERN

 is selected you can select from the available

Groups and the Master as a source.

MODE

MASCHINE offers two different modes for starting the recording available
via Knob 3.

 

DETECT

: If 

DETECT

 is selected, you can set a certain 

THRESHOLD 

using

Knob 4, and, after pressing 

START

, the input signal level exceeding this

threshold will start the recording. This is useful to record a singer or an in-
strumentalist, for example.

SYNC

: If 

SYNC

 is selected, you can synchronize the recording function to

the sequencer, so that the recording starts in sync with the sequencer after
you hit 

START

 (Button 5).

Note: the recording will start as soon as the sequencer starts; if it is al-

ready running, the recording will start at the top of the next bar. Using

Knob 4, you can choose a length for the Sample to be recorded: either 1,

2, 4, 8, or 16 bars or choose Free if you want to stop the recording your-

self.

START

START

 (Button 5) will start the recording. If you have selected 

SYNC

, MA-

SCHINE will wait for the next bar before starting to record; if you have se-
lected 

Detect

, the recording will start as soon as the 

THRESHOLD

 is met.

CANCEL

 (Button 6) cancels the recording; the recorded Sample will not be

saved. 

CANCEL

 is only available after the recording has been started.

DELETE

All Samples are stored in the recording history. Using Button 6 you can de-
lete Samples you have recorded from the recording history.

Sampling and Sample Mapping

Controlling Sampling from the Hardware

 

MASCHINE - Manual - 205

Summary of Contents for Groove production studio
























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands