Native Instruments Groove production studio Manual Download Page 183

Page: 183 / 247

9.5

Automating Effects and Sampler Parameters

One of the really cool features of MASCHINE is the ability to easily automate parameters from
the effect Modules and Sampler Modules.

Hardware

►

To automate a parameter with the MASCHINE hardware controller, first make sure the song

is playing, then simply turn one of the 8 Knobs while holding down the

AUTO WRITE

button.

→

Your automation gets recorded now.

►

If you want to discard it and try again, press

ERASE

, hold it and turn the knob again to

delete the Automation of this parameter.
It is also possible to record automation in the Step Sequencer.
1.

Enter the Step Sequencer by pressing the

STEP

button.

Hold the pad representing the Step you want to automate and turn one of the knobs with
the parameter you want to record Automation for.

Software
If you take a closer look at the knobs on the Parameter pages you will notice they have an outer
ring.

►

You can record Automation by moving that ring with a left click on it and then dragging it

up and down.

►

To remove the Automation, simply right-click (on Mac: [Ctrl]+click) on that outer ring.

Using FX

Automating Effects and Sampler Parameters

MASCHINE - Manual - 183

Summary of Contents for Groove production studio
























































































































































































































































Search results

Summary of Contents for Groove production studio

Reviews:

Brands by name

Popular brands

Native Instruments Groove production studio, Manual

Search results

Summary of Contents for Groove production studio

Reviews:

Brands by name

Popular brands