manualshive.com logo in svg

Motorola Netopia 7000, Administrator'S Handbook

Share
Download
Motorola Netopia 7000 Administrator'S Handbook Download Page 73

73

WAN Ethernet and VDSL Gateways

To allow for concurrent PPPoE and IPoE suppor t on WAN Ethernet Gateways, including VDSL units, 

PPPoE with IPoE

 is available on the PPPoE configuration page. Checking the checkbox will provide this 

concurrent suppor t. When you enable PPPoE with IPoE, the additional WAN inter face becomes available 
for configuration.

☛  

NOTE:

Enabling pppoe-with-ipoe disables suppor t for multiple PPPoE sessions.

ADSL Gateways

ATM Circuits:

 You can configure the ATM circuits and the number of Sessions. The IP Inter face(s) 

should be reconfigured after making changes here.

Available Encapsulation types:

Available Multiplexing types:

PPP over Ethernet (PPPoE)

LLC/SNAP

PPP over ATM (PPPoA)

VC muxed

RFC-1483 Bridged Ethernet

RFC-1483 Routed IP

None

Summary of Contents for Netopia 7000

















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands