Motorola Netopia 7000 Administrator'S Handbook Download Page 136

Page: 136 / 368

Administrator’s Handbook

136

Link:

Ethernet MAC Override

(Only available on models with Ethernet WAN inter faces, such as the 338X-series or VDSL Gateways.)

Your Gateway comes with its own MAC (Media Access Control) address, also called the

Hardware Address

a 12 character number unique for each LAN-connected device.

Your Ser vice Provider, par ticularly cable ser vice providers, may instruct you to override the default MAC
address.

If so, check the

Enable Override

checkbox, and enter the new MAC address in the field provided.

Summary of Contents for Netopia 7000

















































































































































































































































































































































































Search results

Summary of Contents for Netopia 7000

Reviews:

Brands by name

Popular brands

Motorola Netopia 7000, Administrator'S Handbook

Search results

Summary of Contents for Netopia 7000

Reviews:

Brands by name

Popular brands