manualshive.com logo in svg

Motorola Netopia 7000, Administrator'S Handbook

Share
Download
Motorola Netopia 7000 Administrator'S Handbook Download Page 266

Administrator’s Handbook

266

Static ARP Settings

Your Motorola Netopia® Gateway maintains a dynamic Address Resolution Protocol (ARP) table to map IP 
addresses to Ethernet (MAC) addresses. Your Motorola Netopia® Gateway populates this ARP table dynam-
ically, by retrieving IP address/MAC address pairs only when it needs them. Optionally, you can define static 
ARP entries to map IP addresses to their corresponding Ethernet MAC addresses. Unlike dynamic ARP table 
entries, static ARP table entries do not time out.

You can configure as many as 16 static ARP table entries for a Motorola Netopia® Gateway. Use the follow-
ing commands to add static ARP entries to the Motorola Netopia® Gateway static ARP table:

set ip static-arp 

ip-address

 

ip_address

Specifies the IP address for the static ARP entr y. Enter an IP address in the 

ip_address

 argument in dot-

ted decimal format. The 

ip_address

 argument cannot be 0.0.0.0.

set ip static-arp 

ip-address

 

ip_address 

hardware-address

           MAC_address

Specifies the Ethernet hardware address for the static ARP entr y. Enter an Ethernet hardware address in 
the 

MAC_address

 argument in 

nn.nn.nn.nn.nn.nn

 (hexadecimal) format.

IGMP Forwarding

set ip igmp-forwarding [ off | on ]

Turns IP IGMP for warding off or on. The default is off.

IPsec Passthrough

set ip ipsec-passthrough [ off | on ]

Turns IPsec client passthrough off or on. The default is on.

IP Prioritization

set ip prioritize [ off | on ]

Allows you to suppor t traffic that has the TOS bit set. This defaults to 

off

.

Summary of Contents for Netopia 7000

















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands