129
Link:
Internal Servers
Your Gateway ships with an embedded Web ser ver and suppor t for a Telnet session, to allow ease of use
for configuration and maintenance. The default por ts of
80
for HTTP and
23
for Telnet may be reassigned.
This is necessar y if a pinhole is created to suppor t applications using por t 80 or 23.
See “Pinholes” on
page 82.
for more information on Pinhole configuration.
Web (HTTP) Server Port:
To reassign the por t number used to access the Motorola Netopia® embedded
Web ser ver, change this value to a value greater than 1024. When you next access the embedded Motorola
Netopia® Web ser ver, append the IP address with <por t number>, (e.g. Point your browser to
http://
210.219.41.20:8080
).
Telnet Server Port:
To reassign the por t number used to access your Motorola Netopia® embedded Telnet
ser ver, change this value to a value greater than 1024. When you next access the Motorola Netopia®
embedded Telnet ser ver, append the IP address with <por t number>, (e.g.
telnet 210.219.41.20 2323
).
You can also use the LAN-side address of the Gateway, 192.168.1.x:8100 to access the web ser ver and
192.168.1.x:2323 to access the telnet ser ver. The value of 0 for an internal ser ver por t will disable that
ser ver. You can disable Telnet or Web, but not both. If you disabled both por ts, you would not be able to
reconfigure the unit without pressing the reset button.
Summary of Contents for Netopia 7000
