manualshive.com logo in svg

Motorola Netopia 7000, Administrator'S Handbook

Share
Download
Motorola Netopia 7000 Administrator'S Handbook Download Page 176

Administrator’s Handbook

176

Associating a Filter Set with an Interface

Once you have created a filter set, you must associate it with an inter face in order for it to be effective. 
Depending on its application, you can associate it with either the WAN (usually the Internet) inter face or the 
LAN.

To associate an filter set with the LAN, return to the 

Filter Sets

 page.

Click the 

Ethernet 100BT

 link.

The 

Ethernet 100BT

 page appears.

From the pull-down menu, select the filter set to associate with this 
inter face.

Click the 

Submit

 button. The Aler t icon will appear in the upper right 

corner of the page.

Click the Aler t icon to go to the validation page, where you can save your configuration.

You can repeat this process for both the WAN and LAN inter faces, to associate your filter sets.

When you return to the Filter Sets page, it will display 
your inter face associations.

Summary of Contents for Netopia 7000

















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands