manualshive.com logo in svg

Motorola Netopia 7000, Administrator'S Handbook

Share
Download
Motorola Netopia 7000 Administrator'S Handbook Download Page 231

231

reset arp 

Clears the Address Resolution Protocol (ARP) cache on your unit.

reset atm

Resets the Asynchronous Transfer Mode (ATM) statistics.

reset cdmode

This command will set up one boot flag so that the next time a 3342

N

/3352

N

 restar ts or reboots (power 

cycle), the Gateway will boot into CD-ROM mode instead of Gateway mode.

This command is only for the 3342

N

/3352

N

. If the Gateway is not a 3342

N

/3352

N

 this command does 

nothing but returns the message: "CD mode is not suppor ted on this platform."

reset crash 

Clears crash-dump information, which identifies the contents of the Motorola Netopia® Gateway registers 
at the point of system malfunction.

reset dhcp server

Clears the DHCP lease table in the Motorola Netopia® Gateway.

reset diffserv

Resets the Differentiated Ser vices (diffser v) statistics.

reset enet [ all ]

Resets Ethernet statistics to zero. Resets individual LAN switch por t statistics as well as wireless and WAN 
Ethernet statistics (where applicable).

reset heartbeat

Restar ts the hear tbeat sequence.

reset ipmap

Clears the IPMap table (NAT).

reset log

Rewinds the diagnostic log display to the top of the existing Motorola Netopia® Gateway diagnostic log. The 

reset

 log command does not clear the diagnostic log. The next 

show log

 command will display infor-

mation from the beginning of the log file.

Summary of Contents for Netopia 7000

















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands