manualshive.com logo in svg

Motorola Netopia 7000, Administrator'S Handbook

Share
Download
Motorola Netopia 7000 Administrator'S Handbook Download Page 71

71

The 

WAN IP Interface

 page appears.

Enable Interface:

 You can disable the inter face by unchecking the checkbox. However, doing so will dis-

able all ability for your LAN users to connect to the WAN using the Gateway.

Obtain IP Address Automatically:

 Your ser vice provider may tell you that the WAN IP Address for your 

Gateway is static. In this case, disable this checkbox and enter the IP Address and IP Netmask from your 
Ser vice Provider in the appropriate fields.

IP Address:

 This is the IP Address from your Ser vice Provider when using static IP addressing.

IP Netmask:

 This is the Netmask from your Ser vice Provider when using static IP addressing.

☛  

NOTE:

Beginning with Firmware Version 7.7, you can now run an IPoE inter face without an IP address 
(“unnumbered” inter face), if you un-check “Obtain IP Address Automatically” and set the IP 
Address to 0. 

Summary of Contents for Netopia 7000

















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands