manualshive.com logo in svg

Motorola Netopia 7000, Administrator'S Handbook

Share
Download
Motorola Netopia 7000 Administrator'S Handbook Download Page 311

311

VLAN Settings

You can create up to 8 VLANs, and you can also restrict any VLAN, and the computers on it, from adminis-
tering the Gateway. See 

“VLAN” on page 107

 for more information.

set vlan name 

name

Sets the descriptive name for the VLAN. If no name is specified, displays a selection list of node names to 
select for editing. Once a new VLAN name is specified, presents the list of VLAN characteristics to define.

set vlan name 

name

 type [ by-port | global ]

Specifies VLAN 

type

: 

by-port

 or 

global

. Default is 

by-port

.

set vlan name 

name

 id 

VID

Specifies VLAN 

id

 (VID), when type is set to 

global

.  The numerical range of possible VIDs is 1 - 4094. (A 

VID of zero (0) is permitted on the Ethernet WAN por t only.)

set vlan name 

name

 admin-restricted [ off | on ]

Turns 

admin-restricted

  

off

 or 

on

. Default is 

off

. If you select 

on

, administrative access to the Gateway is 

blocked from the specified VLAN.

set vlan name 

name

 seg-pbits [ 0 - 7 ]

Specifies the 802.1p priority bit. If you set this to a value greater than 0, all packets of this VLAN with 
unmarked priority bits (pbits) will be re-marked to this priority.

set vlan name 

name

 ports 

port 

option [ off | on ]

Enables or disables the Gateway’s physical Ethernet, USB or VCC 

port

 or wireless SSID for the specified 

VLAN.

set vlan name 

name

 ports 

port

 tag [ off | on ]

If set to 

on

, packets transmitted from this por t through this VLAN must be tagged with the VLAN VID. Pack-

ets received through this por t destined for this VLAN must be tagged with the VLAN VID by the source. The 

tag

 option is only available on 

global

 type por ts.

set vlan name 

name

 ports 

port

 priority [ off | on ]

Enables or disables the 

priority

 for the por t assigned to the specified VLAN allowing packet prioritization 

based on any 802.1p priority bits in the VLAN header to prioritize packets within the Gateway’s internal 
queues, according to DiffSer v priority mapping rules.

set vlan name 

name

 ports 

port

 promote [ off | on ]

Enables or disables the 

promote

 setting allowing writing any 802.1p priority bits into the IP-TOS header bit 

field for received IP packets on this por t destined for this VLAN. Write any IP-TOS priority bits into the 

Summary of Contents for Netopia 7000

















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands