Motorola Netopia 7000 Administrator'S Handbook Download Page 66

Page: 66 / 368

Administrator’s Handbook

•

RADIUS Server Addr/Name:

The default RADIUS ser ver name or IP address that you want to use.

•

RADIUS Server Secret:

The RADIUS secret key used by this ser ver. The shared secret should have the

same characteristics as a normal password.

•

RADIUS Server Port:

The por t on which the RADIUS ser ver is listening, typically, the default 1812.

Click the

Submit

button.

You can also configure alternate RADIUS ser vers from the Advanced Network Configuration page, by clicking
the

Advanced

link.

The

Advanced Network Conﬁguration

page appears.

You access the RADIUS Ser ver configuration screen from the Advanced Network Configuration web page, by
clicking the

RADIUS Server

link.

Summary of Contents for Netopia 7000

















































































































































































































































































































































































Search results

Summary of Contents for Netopia 7000

Reviews:

Brands by name

Popular brands

Motorola Netopia 7000, Administrator'S Handbook

Search results

Summary of Contents for Netopia 7000

Reviews:

Brands by name

Popular brands