manualshive.com logo in svg

Motorola Netopia 7000, Administrator'S Handbook

Share
Download
Motorola Netopia 7000 Administrator'S Handbook Download Page 52

Administrator’s Handbook

52

• DHCP Server

: Your Gateway can provide network configuration information to computers on your LAN, 

using the Dynamic Host Configuration Protocol (DHCP). 

If you already have a DHCP ser ver on your LAN, you should 
turn this ser vice off. 

If you want the Gateway to provide this ser vice, click the 

Server Mode

 pull-down menu, choose 

Server

, then con-

figure the range of IP addresses that you would like the 
Gateway to hand out to your computers. 

You can also specify the length of time the computers can 

use the configuration information; DHCP calls this period the lease time.

Your Ser vice Provider may, for cer tain ser vices, want to provide configuration from its DHCP ser vers to the 
computers on your LANs. In this case, the Gateway will relay the DHCP requests from your computers to a 
DHCP ser ver in the Ser vice Provider's network. Click the relay-agent and enter the IP address of the Ser vice 
Provider's DHCP ser ver in the Ser ver Address field. This address is furnished by the Ser vice Provider.

☛  

NOTE:

The 

Relay-agent

 option only works when NAT is off and the Gateway is in router mode.

Summary of Contents for Netopia 7000

















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands